QTA4040M Mixer Amplifier
The QTA 4040M has been designed as a tabletop mixer amplifier created specifically for small installations where space is limited and a full sized 19 inch amplifier is not available. Filled with practical features and easily accessible controls, the QTA4040M is a practical and simple to use device that doesn't compromise on features.
Features
- 1 MIC balanced/unbalanced input with phantom power
- 1 front MIC input
- Stereo AUX input
- Stereo RCA line output
- 100V,70V constant voltage outputs and 4~16 Ohms constant resistance output
- Built-in treble bass adjusting bass 10dB at 100Hz treble 10dB at 10KHz
- 40W Rated Power
Specifications
| Speaker Line Input | 4~16Ω, 70V, 100V |
| Power source | ~220V - 240V 50/60Hz |
| Power consumption | 60W |
| Net weight | 4.0Kg |
| Gross weight | 4.5Kg |
| Dimensions | 320 x 273 x 66mm |
| Amplifier Section - (amp in @ 1khz,8ohm Load Output) | |
|---|---|
| Rated maximum output power (THD 1%) | 40W |
| Input sensitivity/impedance | 1V/20Kohms |
| Frequency response (At 1KHz Half power output) | 80Hz~16KHz (+1dB/-3dB) |
| MIC1~2 input section - (MIC in@1Khz, preamp out) | |
| Input sensitivity/impedance | 5mV/500ohms,unbalance, 2.5mV/500ohms,balance |
| AUX input section - (AUX in@1Khz, preamp out) | |
| Input sensitivity / impedance | 300mV/500ohms |
| TEL input section - (AUX in@1Khz, preamp out) | |
| Input sensitivity / impedance | 1V/500ohms |
Contact Quest
Phone: +61 (0) 3 8373 6868
Address: 86 Derby Street, Pascoe Vale VIC 3044 AustraliaFind Your Local Distributor
Feel free to get in touch with your nearest distributor. We’re always happy to hear from people interested in our products and we’re always ready to help you with your next project. You can find your nearest Quest distributor on the map below.
Contact Form
For general enquiries email Quest Directly using the enquiry form below.