QTA6000M Series Mixer Amplifiers

QTA6060M [6x60W @ 100V] - QTA6130M [6x130W @ 100V]

QTA-D Series Digital Power Amplifiers


The QTA6130M is an analogue table-top or rack mountable 130 watt mixer amplifier designed for 70/100V line commercial sound installations. The amplifier can also be connected to a low impedance speaker system and will drive 130 watts into a 4Ω load. Quest has packed as much as possible into this small package to give maximum flexibility and choices for the commercial sound designer/installer. The QTA 6130M is a feature packed mixing amplifier built to professional audio standards.

A Closer Look

The QTA-6130M amplifier is an 8 input channel mixer/amplifier designed for distributed paging and background music systems and music on hold for a single zone distributed audio system.

With 4 microphone/line inputs and 4 stereo inputs, the 6000 series mixer amplifiers will accommodate a variety of input sources including paging microphones, CD players, and digital music players. This 8 input channel mixer amplifier has muting and output options along with a special bridge in/out feature to allow the addition of multiple amplifiers. VCA remote level control circuitry is included.

Multiple Input Options

In addition to the XLR/Phono/RCA inputs, all inputs and outputs can be hard wired via the rear mounted barrier strip. The QTA6130M can have additional power amplifiers connected if more power is needed.


  • 6 inputs (1-5 selectable as either Mic or Line)
  • Built in VOX muting
  • Phantom Power available on Mic inputs
  • Built in Chime module with external rear mounted bypass switch
  • Terminals for remote chime activation
  • Inputs 1-5 offer both XLR connections for mic and RCA for line inputs
  • Separate rear mounted Tele-page input with independent level control
  • Option of XLR and barrier strip for all mic inputs
  • Rear mounted AUX level control
  • Tape Output
  • Pre Output
  • 24v DC Power capability
  • 2 RU mounting capability
  • Inbuilt protection against short circuit or overload
  • 2 years replacement warranty




Model QTA-6060M QTA-6130M
Rated Power Output 60W 130W
Transformer Outputs 4Ω,70V/100V
Frequency Response 50Hz~16KHz±2dB
Distortion <1% at rated power (1KHz)
Sensitivity Input 1 : Line/Tel 316mV(-10dBV) 10Kohm (600Ωw optional/ transformer)
Mic :316mV~3.16mV (-50dBV~-70dBV)
Input 1-5 : Line 316mV(-10dBV) 10Kohm Mic 316mV~3.16mV (-50dBV~-70dBV)
Input 6 : Line 300mV/100mV(-10dBV/-20dBV) Selectable
Outputs Main: Transformer coupled, balanced, 8Ω, 25V, and 70V
Zone 2~8Ω Unbalanced 1W
Zone 2~600Ω Balanced 1.5V
Signal to Noise Ratio Mic >55dB
Line >55dB
Telephone >75dB
Tone Controls : Bass ±10dB @ 100Hz
Tone Controls : Treble ±10dB @ 10kH
Indicators Power, signal, peak
Power Requirements ~240V/50Hz,24V DC (Optional)
Power Consumption 100W 200W
Dimensions (mm) 484 x 300 x 88 484 x 300 x 88
Net Weight 13kg 15kg
Gross Weight 14.2kg 16.2kg

Contact Quest

Phone: +61 (0) 3 8373 6868

Address: 130 -140 Melrose Dr, Tullamarine VIC 3043 Australia

Postal: P.O. Box 1071 Tullamarine VIC 3043 Australia

Find Your Local Distributor

Feel free to get in touch with your nearest distributor. We’re always happy to hear from people interested in our products and we’re always ready to help you with your next project. You can find your nearest Quest distributor on the map below.

Contact Form

For general enquiries email Quest Directly using the enquiry form below.